repair HP OMEN 880 Gaming PC - Removing and Replacing the System Memory

Лучше скажите как материнку поставить нормальную в ваш корпус? Почему у вас на копусе не заменяемая планка для разьёмов материнки а монолитная фрезерованная хуета, кто это придумал?

Seems that memory error code is pretty universal across all HP machines. I was adding new memory sticks to my HP Omen 880 recently and I got the dreaded 3 long beeps 2 short beeps error code. After my panic subsided, I got real close to the memory slots and gently but firmly pressed down on the securing clip side of the memory card, and suddenly it went in another mm or so and there was another 'click'. After that it worked like a charm. Those DIMM memory slots on the Tampa mb are poorly designed and take more effort than you'd think to seat them. When they first went in it did seem to click, but failed to seat, thus the error code.

The Tampa MB with the i7-8700K CPU came with 16GB (2-8GB cards) of memory, and there is much conflicting information on if it will support more than the published 32GB of memory. Short answer is YES. I just added 2-16GB cards to the 2-8GB cards and now have 48GB of RAM. Same speed of DIMM's but different sizes in the paired slots. So YES it will support 64GB.

i have a naples motherboard from omen can i set in new ramsticks at 3200mhz 32gb?

I currently have 2 8gb ram sticks, one that came with the prebuilt pc at 2666mhz speed and one i purchased at 2400mhz speed. It says that my ram speed is only 2133mhz, why is this? I am thinking of upgrading to two 8gb ram sticks ddr4 at 3200mhz speed. Is this compatible with my pc or will it just stay at the speed 2133mhz? If so what is the best ram to upgrade to and how do i fix my problem?

hi there, i have a 880 130 model, what s the maximum RAM can be upgraded, which frequency is the best! thnks

I replaced my RAM with higher clock speed modules and the system is still reading them as the old speed and because of the way you have locked down your BIOS settings it is impossible to change it. A warning on your site or on the motherboard specifications site would have been appreciated before I spent money on something that I can't use to its full potential. I don't understand what good locking down the BIOS does. People who are accessing the BIOS probably need to access it for a reason.

Do I need to set the ram speed in BIOS? See the bios on my PC doesn't seem to have an option to set XMP

I currently have a HP Omen 880-p0xx, i7-7700 16GB RAM with HP 8308 motherboard installed. I would like to know what is the maximum RAM that I can upgrade too?

I have a hp omen 880-101na and I would like to upgrade my ram by adding an extra stick could recommend a stick of ram to use thanks! And also what is the worst case scenario that could happen when upgrading ram?

Thanks a lot :)

Bonjour j'ai un PC OMEN 880-194 nf, le même que le vôtre, apparemment il faut mettre une RAM micron, j'ai 8 GO de RAM et j'aimerai mettre 8 GO de plus, qu'elle modèle mettez-vous sur la vidéo ? car je ne l'ai pas trouvé et j'ai peur de me tromper je m'y connais vraiment pas beaucoup, merci par avance, cordialement, melle Adine catherine

Hey do I need to reset the bios? When I install new ram

I have a HP OMEN pc and I wanted to add another 16 gbs but it won’t fit it’s a hyperactive fury what can I do?

Are all of your rams DDR 4?

Where i can buy ram?

Hello, I have HP omen 800-108 NE it came with 4x 8gb ( 32 GB RAM ) can I replace these with 4x16 GB RAM ( 64 GB RAM )

Hi, I have an HP OMEN 880-023d, and at pc startup, i get 3 slow beeps followed by 2 fast beeps. I don't know what to do, since no fixes worked and it's been a year

So I have an HP 880-181 and want to to replace my ram with 2x 8gb, but I can't figure out what frequency it supports. The site says it supports 2400mhz, but when I look at the frequency my current stick runs at it says 2666mhz. What does this mean?

Hello, I have a HP OMEN 880-147nz and want to upgrade the Ram to 16 X 2 (32GB), will this ram "16GB, DDR4-2400, DIMM 288" work on the PC? currently the system shows installed ram is "8GB Kingston 2667MHz" X 2 (in two slots), Many thanks in advance.

Yeah see I did this, replacing the standard 8GB with 2 Corsair Vengeance RAM sticks. Now I get the blue screen of death upon start up once a day. No fix seems to be working.